home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.19970626-19970929
/
000351_news@newsmaster….columbia.edu _Mon Sep 15 11:37:43 1997.msg
< prev
next >
Wrap
Internet Message Format
|
1997-09-28
|
3KB
Return-Path: <news@newsmaster.cc.columbia.edu>
Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.35.30])
by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id LAA19182
for <kermit.misc@watsun.cc.columbia.edu>; Mon, 15 Sep 1997 11:37:42 -0400 (EDT)
Received: (from news@localhost)
by newsmaster.cc.columbia.edu (8.8.5/8.8.5) id LAA23212
for kermit.misc@watsun; Mon, 15 Sep 1997 11:37:42 -0400 (EDT)
Path: news.columbia.edu!watsun.cc.columbia.edu!fdc
From: fdc@watsun.cc.columbia.edu (Frank da Cruz)
Newsgroups: comp.protocols.kermit.misc
Subject: Re: server and client plus modem trouble
Date: 15 Sep 1997 15:37:39 GMT
Organization: Columbia University
Lines: 45
Message-ID: <5vjko3$7k5$1@apakabar.cc.columbia.edu>
References: <341C1F85.D06543BC@cc.ruu.nl>
NNTP-Posting-Host: watsun.cc.columbia.edu
Xref: news.columbia.edu comp.protocols.kermit.misc:7674
In article <341C1F85.D06543BC@cc.ruu.nl>, Fedor M <F.Mulder@cc.ruu.nl> wrote:
: I want to communicate with family in Cuba. The phone lines are very bad
: there so I won't to use an old modem with 9600 baud an Tornado III. At home
: I have a Victory 14400e modem. Question 1: So how do I get the modem files
: is there a place where I can find them?
:
The current version of MS-DOS Kermit is 3.14:
http://www.columbia.edu/kermit/mskermit.html
It comes with a fairly large collection of modem files, but we don't have
modem files for Tornado or Victory modems -- maybe some other readers can
help you out? Otherwise, you have two choices:
1. Read the modem manual to discover the commands for the command, and
then adapt one of the existing modem files to your modem.
2. Don't use a modem dialing script. Just CONNECT and type the dialing
command by hand.
: How is the sequence to connect one msdos-kermit with another
: msdos-kermit.
:
: PC 1 (client) PC 2 (server)
: start kermit start kermit
: (should I start the server here?)
:
: dial pc2
: connect
: (should I start the server of pc2 here?)
: get or put file
: bye
:
It depends upon what you want to do. If you start a server on one end,
there is no point in giving a CONNECT command on the other end because
you won't see anything.
Anyway, it is a lot to explain in an email message. It is the subject of
two chapters (10 and 11) of the manual, "Using MS-DOS Kermit":
http://www.columbia.edu/kermit/manuals.html
Good luck!
- Frank